Segway · 2022 · A-codes (ABS module)
2022 Segway Fugleman UT10 / UT10 Crew fault codes
ABS faults print A0001–A0008 on printed p. 64 of the Vision: 20210716 Fugleman UT10 / UT10 Crew owner's manual: four wheel-speed error signals (left front, right front, left rear, right rear), two module-voltage rows, and the vehicle-speed and CAN single-failure rows. All 8 rows, descriptions quoted verbatim.
Scope note
Built from the same VEHICLE DEVICE chapter as the ECU, EPS, and T-BOX tables (printed p. 64, verified from rendered page images).
The ECU part of the same table also carries the ABS communication row U0121 87 "Lost Communication With Anti-Lock Brake System (ABS) Control Module".
Descriptions quote the machine-translated English phrasing verbatim; the wording is Segway's, not ours.
Table profile
This page reproduces 8 entries from the 2022 Segway Fugleman UT10 / UT10 Crew owner’s manual.
Rows keep the manual’s printed order, from A0001 to A0008.
The table uses manufacturer codes rather than SPN/FMI pairs. The printed codes group into 8 A-codes.
Every printed code carries one title in this table.
These counts describe the rows on this page, not every manual in the archive. The source box below lists the exact citation for every record on the page.
Full OEM table
8 entries from the 2022 Segway Fugleman UT10 / UT10 Crew owner's manual diagnostic table.
This chapter publishes one condition line per code. The condition column below keeps the manual's wording; the FMI glossary explains the numeric suffix.
No entries match that filter. Try the code number, component name, or FMI.
| Failure Code | Failure Description (OEM manual) |
|---|---|
| A0001 | Left front wheel speed error signal |
| A0002 | Right front wheel speed error signal |
| A0003 | Left rear wheel speed error signal |
| A0004 | Right rear wheel speed error signal |
| A0005 | Voltage of ABS module is too high |
| A0006 | Voltage of ABS module is too low |
| A0007 | Vehicle speed single failure |
| A0008 | CAN single failure |
Source: Segway Powersports Fugleman UT10 / UT10 Crew owner's manual, edition Vision: 20210716, doc U09L01000002 - VEHICLE DEVICE / Diagnostic displays code definitions, ABS rows (printed p. 64). Codes can vary by trim, market, and running changes.
Reading the table
The Failure Code column is the printed ABS module code (A0001–A0008). The Failure Description column quotes the printed row verbatim, including phrasing such as "Voltage of ABS module is too high" and "Vehicle speed single failure".
A label identifies a monitored circuit or condition. It does not confirm that a named part has failed, and it does not establish whether the machine is safe to operate.
Write down the full code, the model year and model, and the conditions when it appears. That record is what the manual and a service provider use to match the entry to your machine.
Source note
This page publishes short labels from the public OEM owner's manual chapter, not the manual's long-form repair prose. The source box below gives the exact chapter and model-year coverage.
Scope
This is a label index. It does not provide repair procedures, parts advice, or a diagnosis for a specific machine. Codes can vary by trim, market, and running changes.
Common questions
What does this 2022 Segway Fugleman UT10 / UT10 Crew table cover?
This page lists 8 code entries from the cited public OEM chapter (Segway Powersports Fugleman UT10 / UT10 Crew owner's manual, edition Vision: 20210716, doc U09L01000002 - VEHICLE DEVICE / Diagnostic displays code definitions, ABS rows (printed p. 64)). The table preserves the short condition or component/failure labels published in that chapter.
Where can I check the source?
The source box at the bottom of the page gives the manual P/N, the model-year coverage, and a link to the OEM chapter. The methodology page explains the site’s source and labeling rules.